Power Washing Exterior

Exterior Power Washing

Home or Office Exterior Power Washing

The process of exterior power washing is one that many homeowners and business owners are either unaware of or may not know how to properly execute. This article will go over the basics, list some important considerations, and give you a few tips for getting the best results from your next exterior power wash.

How to prepare for an exterior power wash?

When preparing to power wash your home or office exterior, there are a few things you’ll want to keep in mind. First and foremost, you’ll want to make sure the surface you’re washing is free of debris. This means removing any cobwebs, leaves, dirt, or other buildup from the area you plan to wash.

You should also consider the surface material of your home or office. Some materials, such as wood, are more susceptible to damage from power washing than others. If you have any concerns about how your material will respond to power washing, it’s best to consult with a professional before proceeding.

Finally, take into account the condition of your gutter and downspouts. If they’re clogged, it can cause water to back up and potentially damage the exterior of your home or office. Make sure to clear any debris from these areas before beginning the power washing process.

Power Washing Exterior
Power Washing Exterior

The basics of exterior power washing:

Once you’ve prepared your surface and gathered your supplies, it’s time to get started on the power washing itself. The basic steps are as follows:

  1. Start by wetting down the area you plan to wash. This will help loosen any buildup on the surface and make it easier to remove.
  2. Apply detergent to the surface and scrub with a brush or broom. Be sure to focus on any areas that seem to have the most buildup.
  3. Rinse the surface with clean water to remove the detergent and any other residue.
  4. Repeat as needed until the surface is clean.

Tips for getting the best results from exterior power washing:

There are a few things you can do to maximize the results of your exterior power wash:

  1. Start with a cold water rinse. This will help remove any loosened dirt or debris, and it’s less likely to cause damage to your home or office.
  2. Use a lower pressure setting. This will help avoid damage to your surface and also reduce the amount of time needed to complete the power wash.
  3. Work in small sections. This will help ensure that you don’t miss any areas and that the entire surface is cleaned evenly.
  4. Use a lower pressure setting on your power washer. This will help prevent any damage to the surface and reduce the risk of overspray.
  5. Keep a close eye on the surface material as you wash. If you see any signs of damage, stop immediately and consult with a professional.
  6. Keep an eye on the weather. Exterior power washing is best done on a cloudy day, as direct sunlight can cause the detergent to dry too quickly and leave behind streaks or spots.
  7. Wait for the surface to dry before applying any sealants or coatings. Applying sealants or coatings before the surface is completely dry can cause them to not adhere properly and may lead to peeling or flaking.

Following these tips will help you get the best results from your next exterior power wash. By taking the time to prepare properly and using the right techniques, you can safely and effectively clean the surface of your home or office. Consult with a professional if you have any questions or concerns about the process, and be sure to heed all warnings and precautions before getting started.

Power Washing Siding of Home
Power Washing Siding of Home
Canadian Pro Clean
7345 Leary Crescent, Chilliwack, BC V2R 1K2, Canada
+1 604-229-4620